Overview
M20 brings wheel-legged access to narrow spaces and industrial terrain. The working speed is used instead of the larger laboratory peak, and its 15 kg working load is kept separate from a 50 kg maximum. M20S and M20 Pro are not treated as the same configuration.
Capabilities & applications
- Wheel-legged industrial mobility
- Hot swapping
- LiDAR perception
Where it fits
- Inspection
- Emergency-response sensing
Specifications
Manufacturer-reported. Values apply to the configuration described here.
- Configuration
- LYNX M20 standard; not M20S or M20 Pro
- Locomotion
- Wheel-legged
- Dimensions / pose
- 82 × 43 × 57 cm, standing
- Weight (kg)
- 35
- Weight conditions
- Battery included
- Walking payload (kg)
- 15
- Payload conditions
- Operating payload; 50 kg maximum is separate
- Speed (m/s)
- 2
- Speed conditions
- Operating maximum; 5 m/s laboratory peak is separate
- Active runtime
- 3 hours unloaded; 2.5 hours with 15 kg load
- Battery / charging
- Hot-swappable dual batteries; single-battery charge 1.5 h
- Ingress protection
- IP66
- Operating temperature
- −20 to 55°C
- Terrain capability
- 25 cm continuous stairs; 80 cm single obstacle claim
- Actuators / degrees of freedom
- Not published
- Perception / sensors
- Two 96-line LiDARs and two wide-angle cameras
- Connectivity / interfaces
- Not published
- Developer access
- Modular interfaces; confirm OTA-dependent features
Limitations & integration
Published capabilities depend on configuration and operating conditions. Confirm the supplied sensors, software permissions, accessories, service coverage and application requirements before purchase.
